+86-547-83030786

News

Home > News > Content

Nine Effective Maintenance Methods Of Auto Parts

Many owners in the purchase of parts very carefully, but easy to forget accessories maintenance after installation, so in the driving car journey gradually increased under the condition of parts is easy to wear, use time is shortened. The following is to provide you with nine parts Maintenance Notes

1,avoid washing

For the engine paper air filter, can not use any oil cleaning; for the cortex parts, also should not use oil cleaning.

2,avoid oil

Engine dry air filter paper filter, such as with oil, easy to make the mixture concentration high suction cylinder, the air volume, increase fuel consumption, engine power is reduced; if the belt is dipped in oil liquid, will accelerate the corrosion of aging; brake shoe, dry clutch friction plate and the brake band touch oil liquid, would threaten traffic safety.

3, avoid heat

The temperature of the engine piston is too high, easily lead to overheating and melting holding cylinder; overheating rubber seals, triangle tape, tire, premature aging, decreased performance, shorten the service life; coil overheat of motor generator regulator and other electrical equipment, easily burned scrapped.

4,avoid pressure

If the tire pressure is not timely and long-term storage of pile turning, will be distorted because of extrusion; air filter, fuel filter paper filter, such as extrusion, and not reliable to filter effect; rubber seals, triangle tape and tubing can not squeeze.

5, avoid dirty

Fuel filter, oil filter, air filter, hydraulic oil filter screen and various parts such as if too dirty, will lead to the filtering effect of variation. The radiator of water tank, air-cooled engine block and cylinder head, radiator, cooler, radiator and other parts are dirty, which will lead to poor heat dissipation and high temperature.

6, avoid reverse 

The engine cylinder pad can not be installed in the installation, otherwise it will lead to premature damage of cylinder pad ablation; engine fan blade installation can not get back on; direction of tyre, herringbone tread tires, after installation of ground yu should make herringbone pointing back.

7, avoid repetition

Some parts should be used at a single time, but individual drivers or repairman can reuse them for saving or not understanding the taboo, which can lead to accidents.

8, avoid near fire

Tire, triangle belt, cylinder water, rubber seals and other rubber products, if near the fire, will be easily aged or damaged, on the other hand also may cause fire accident.

9,avoid missing

The engine valve lock, should be installed in pairs, such as leakage or loss will lead to valve out of control and crashed the piston; engine connecting rod bolts, flywheel bolts, drive shaft bolts installed on the cotter pin, locking screws, insurance piece or a spring pad locking device, once the leakage will be in use, may lead to the occurrence of serious fault.


Home | About Us | Product | News | Knowledge | Contact Us | Feedback | Mobile | XML

TEL: +86-547-83030786  E-mail: sales@bellright.com

Copyright © Ningbo Yiluda Automotive Products Co.,Ltd All Rights Reserved.